Frame TV gallery wall ideas: how to make the TV disappear among the art
Updated September 17, 2026
A Frame TV on its own is a TV showing a picture. A Frame TV in a gallery wall – same bezel as the frames around it, same matte, same height, art in the same style – is almost impossible to pick out. Here are the layouts and the details that make it work, for living rooms and bedrooms.
The four rules
- Match the bezel to the frames. Teak bezel with oak frames, white with white, walnut with dark wood. Buy the frames after choosing the bezel if you can. Options in bezels and frames.
- Match the digital matte to the mats. If your prints have a 2-inch white mat, give the Frame’s art a white matte in Art Mode. If they are full-bleed, use no matte.
- Hang at one centre line. The Frame is the largest piece; everything else aligns to its centre, roughly 57–60” from the floor (lower above a sofa).
- Match the art. Whatever is on the TV should belong with its neighbours – the same era, palette and medium. This matters more than any hardware.
12 layouts and ideas
1. The centrepiece. Frame in the middle, two columns of smaller frames either side, aligned top and bottom to the TV’s edges. Classic and easy.
2. Salon wall. The Frame as one of many frames of mixed sizes, hung tightly (2–3” gaps) floor to ceiling. Works best with a wood bezel and vintage-style art on the TV – see the vintage collection.
3. The grid. Four to six identical frames plus the TV in an even grid. Needs the Frame’s aspect ratio (16:9) to echo the prints – use landscape-format prints.
4. Ledge shelves. The Frame wall-mounted above a picture ledge with leaning frames below and beside it. Frames can overlap the TV’s lower edge slightly to break the rectangle.
5. Above the console. Frame centred over a low console, one large print each side, plants or objects on the console breaking the base line.
6. The pair. Frame plus one equally large framed print beside it, same bezel finish, same art style. Surprisingly effective – the eye assumes two paintings.
7. Vertical stack. In a narrow wall, the Frame with a matching-width print above and below.
8. Bedroom above the dresser. A 43” or 50” Frame flush over a dresser with two small frames flanking – calming art from the contemplative collection with a wide matte.
9. Black-and-white wall. Monochrome prints, black frames, black bezel (the one time black works), and the Frame showing minimalist or monochrome pieces.
10. Botanical wall. Botanical prints in light wood, teak bezel, and the Frame cycling through the botanical collection – the most natural blend there is.
11. Seasonal swap. Keep the physical frames neutral (abstract or botanical prints) and let the Frame carry the season – fall, Christmas, spring – so the wall changes without rehanging.
12. Picture-light wall. A picture light above the Frame and above one or two large neighbours, Art Mode brightness turned down to match. Nothing convinces more.
Mistakes to avoid
- The TV is the brightest thing on the wall. Lower Art Mode brightness until the TV’s white matte matches the paper of the prints; warm colour tone. See make it look real.
- Glossy photos among matte prints. Use painterly art on the TV.
- Visible cable. Route the One Connect cable in the wall or a cable channel painted the wall colour.
- Mixed frame finishes. Two finishes maximum across the wall, and the bezel must be one of them.
- Mounting the TV higher than the art. It is a picture; hang it like one.
- A soundbar directly beneath. It says TV. Move it to the console or choose an in-wall or invisible speaker.
Planning the layout
Cut paper templates for each frame (and the TV at its bezel size – 65” Frame is roughly 57” × 33”), tape them up, live with it for a day, then hang. Keep 2–3” between pieces. Start from the TV’s centre line and work outward.
Art for the TV in a gallery wall
The safest choices are pieces that could plausibly be prints: vintage-style engravings and folk prints, botanicals, oil landscapes, still life, or photography for a monochrome wall. Put six or eight in a slideshow (how to set rotation) and the wall quietly changes through the day.
Frequently asked questions
How do you make a Frame TV blend into a gallery wall?
Match the bezel to the other frames, match the digital matte to their mats, hang everything at the same centre height, and display art on the Frame in the same style and palette as the pieces around it. Lower Art Mode brightness so the TV is no brighter than the prints.
What height should a Frame TV be on a gallery wall?
Centre it at the same eye level as the other pieces – typically 57–60 inches from the floor to the centre for a standing viewer, a little lower above a sofa. Treat it as the largest piece in the arrangement, not as a TV.
Can you put art around a TV?
Yes, and it is the best trick for a non-Frame TV too: surrounding a screen with framed art makes it read as one more frame. Keep consistent spacing (2–3 inches) and frame finishes.
What art should the Frame show in a gallery wall?
Something in the same family as its neighbours – vintage botanicals beside botanical prints, an oil landscape among oils, black-and-white photography among monochrome prints. Avoid a single bright photo in a wall of muted prints.